Products

BRILLANTINI

Synthetic micro-chips used in certain transparent formulates to obtain the “Brilly effect


COLORPASTA W

Dispersion of pigments in aqueous vehicle used to color water-based acrylic and epoxy systems. Dosage depends on the desired intensity of color.


COLORSIVIT 00

Tixotropic mono-component product, easy-to-apply. Is used to obtain a spatulated effect on COLORSIVIT M (for walls) or on COLORSIVIT MALTA (for floors).


COLORSIVIT EPOX N

Opalescent solvent-free epoxy product. Suitable for smoothing or for transparent top-coating with a thickness of around 0.7 mm (higher thickness are not recommended as this would impair the transparency of the film).


COLORSIVIT EPOX T

Transparent solvent-free epoxy product. Ideal for making thick transparent top-coating of approx. 3 mm (lower thickness are not recommended as defects may appear).


COLORSIVIT M

Tixotropic mono-component product, easy-to-apply. Is used in wall coverings as smoothing compound prior to application of COLORSIVIT 00.


COLORSIVIT MALTA

Waterborne two-pack epoxy system filled with select inerts. Can be applied as smoothing compound or as semi-self-leveling mortar. Is pigmented at the time of application with COLORPASTA W paste in order to obtain the shade desired.


COLORSIVIT MONO

Waterborne one-component, polyurethane system easy-to-apply The product is characterized by excellent film formation also on highly absorbent substrates.


COLORSIVIT VELATO

Waterborne two-pack epoxy system. Its neutral formulation permits pigmentation at the time of application with COLORPASTA W to obtain the shade desired. Is used to make spatolated floors permeable to moisture, as a replacement for COLORSIVIT EPOX N.


FINISOL COLORATO

Pigmented version of FINISOL TRASPARENTE.


FINISOL TRASPARENTE

Solvent-based aliphatic polyurethane system characterized by excellent mechanical and chemical strength and resistance to UV rays. Applied to epoxy coatings, it protects these against yellowing. The film obtained after cross-linking has a very high gloss.


FINIWATER T

Waterborne two-pack polyurethane system. The film formed after coalescence and cross-linking is characterized by satin gloss and good chemical resistance to various aggressive products.


PASTA OPAC W

Water-based matting paste, used to reduce the gloss of water-based top-coatings. The percentage of paste to be inserted in the system depends on the level of matt required (25% when using FINIWATER T).


PAVIPLAST

Colored, solvent-free epoxy compound ideal for making self-leveling floors of approx. 3 mm.


PAVIWATER

Pigmented water-based epoxy compound. Is used as top coating on various substrates and as adhesion promoter on tiles.


PAVIWATER T/68

Transparent water-based epoxy compound. Is used as primer on absorbent mineral supports and as adhesion promoter on tiles or on old resin coverings.


PEARLESCENT PIGMENT

Pearlescent powder used in certain transparent formulates to obtain a mother-of-pearl finish.


COLORED QUARTZ

German colored quartz available in various sizes and colors; is used to make spreaded floors


SIVITCERA

Water-based dispersion of acrylates and polymer waxes with good surface hardness.